Moisture Detection Instruments
Rotovac has an excellent selection of moisture detection instruments, including the following Dri-Eaz Tools:
We know that building inspections aren't always in ideal conditions - Well, here's your solution! The easy to use 2-in-1 TechCheck Plus was designed with simplicity in mind and helps to make even the most demanding inspection simple. The newly updated TechCheck Plus has all the great features you've come to expect along with some new ones.
Measuring, recording and tracking the moisture content of structural materials is critical to demonstrate that the building is being dried properly; justify equipment rental charges and to protect yourself from future liability that can result from improper drying.
GE Protimeter Surveymaster
The GE Protimeter Surveymaster offers 2 different ways to track the moisture content of carpet and pads: non-invasive radio frequencies and penetrating pins. Use the Surveymaster to tell sub-surface from surface dampness. This is absolutely essential knowledge when diagnosing the extent and root cause of a moisture issue.
GE Protimeter Hammer Electrode
The GE Protimeter Hammer Electrode gets through structural material like sub-floors & framing to 1.38 inches (or 35 millimeters). The Hammer Electrode's insulated pins can tell you the precise moisture level of wood material or give you the Wood Moisture Equivalent (WME) percentage of various other materials.
Dri-Eaz Hydrosensor I
Follow the migration of water in your client's carpet (and carpet pad) without wearing out your back by constantly bending over which is hard on the spine.
Dri-Eaz Hydrosensor II
Follow the path of water in carpet and pad without messing up your back and spine.
Pocket Thermo-Hygrometer - Wide Range and Fast Humidity Measurements - Measures temperature and humidity simultaneously. Use for all water damage & drying situations. Maximum and minimum memory functions for both humidity & temperatures. Fahrenheit to celsius switchable.
Sonin Moisture Measure Tool
Great for cleaners, inspectors, contractors, adjusters and homeowners to find out if excess moisture is present. Press the metal contact into surface to determine extent of moisture problem. The more lights on, the higher the moisture level. 9 volt battery required (not included).
Moisture Test Meter
This moisture test meter is designed to alert users to possible moisture problems. The metal contacts at the end of a 3' coiled cable detect moisture present in difficult to reach locations. Extremely useful in water restoration, urine detection, etc.
- Fast response time (<30 seconds)
- Dual backlit display
- Simultaneous display of: Humidity/Temperature, Humidity/Dew Point or Humidity/Wet Bulb
- Data Hold and Min/Max functions
Digital PH Meter
ExTech pH Meter has a unique flat surface electrode that allows for wider applications including on-the-spot surface measurements. It features a waterproof design with a rubberized housing which provides a non-slip grip. The plug-in electrode is easy to clean and maintain.
Displays air velocity, temperature, or wind-chill. Helps evaluate ventilation issues indoors, airflow for water damage restoration, and determine local weather conditions. Pocket size with averaging functions set at various intervals. CR2032 lithium battery included.
Datalogger for Temperature & Humidity
- 32,000 readings (16,000 for each parameter: Humidity/Temperature)
- Dew point indication via Windows® software (included)
- Selectable data sampling rate: 2s, 5s, 10s, 30s, 1m, 5m, 10m, 30m, 1hr, 2hr, 3hr, 6hr, 12hr, 24hr
- User-programmable alarm thresholds for RH and Temperature
- Status Indication via Red/Yellow LED and Green LED
- Long battery life
- Dimensions: 5.1x1 .1x0.9" (130x30x25mm)/Weight: 1oz (20g)
- Complete with 3.6V Lithium battery and Windows® compatible analysis software
Suretest Circuit Analyzer
The proper operation of your restoration equipment relies on an adequate supply of electrical power. Overloaded circuits and tripped circuit breakers can waste valuable time in the restoration process.
Now with the SureTest Circuit Analyzer you can check each outlet to determine the available voltage and amperage to be sure your equipment will operate properly and continue to operate until the job is completed.
Used to assess and monitor the relative moisture level of materials including plaster, masonry, lumber, gypsum, shingles, concrete, fiberglass (GRP) and many more. It is ideal for checking the relative moisture condition of building elements such as solid walls and floors prior to more rigorous and time-consuming investigative procedures that may be required. Leak paths in shower cubicles (behind ceramic tiles), in caravans/motor homes and mobile homes can be identified with the Aquant before visible water damage occurs. Also, this instrument may be used for surveying GRP boat hulls for the early detection of damp spots that could lead to blistering caused by osmosis.
The Navigator Pro is the state-of-the-art in moisture measurement technology for the water restoration pro! This three-in-one meter integrates pin and pinless technologies in one instrument. With an optional hammer probe you can take all required measurements including RH, temperature and moisture content of virtually any material. Plus, the Navigator Pro corrects for materials temperature for TES operators!
GE Protimeter MMS Plus
The complete meter package! The GE Protimeter MMS Plus system has 3 different meter functions in 1 convenient unit. It also serves as a data logger. It’s an incredible tool, a tool that’s perfect for the restorer that wants to upgrade and buy an all in one moisture measuring system.
Dri-Eaz DriHawk T-700
Take precise, digital readings of temperature and relative humidity with the DriHawk thermo-hygrometer from Dri-Eaz. The DriHawk helps you determine the quality of drying conditions in the affected area and make equipment decisions. You can also use the DriHawk as a data logger with DriHawk Software!
DriHawk Data Logging Software
Take full advantage of the data logging capability of your DriHawk! Load DriHawk Data Logging Software onto your office computer, then use the readings from your DriHawk to produce scientific reports of drying progress. Hand the reports to adjusters and homeowners to prove the structure is dry.